Matrice 600
SKU:
$4,599.00
$4,599.00
- Designed for filmmakers and industrial applications
- Multiple gimbals supported including the Ronin-MX
- A3 and Lightbridge 2 built-in
- Extended flight time and long range transmission
- Professional HD transmission
- Powerful app control
- SDK supported
- Upgradeable with A3 PRO and D-RTK GNSS
Note: Not Assembled. Not Integrated with LiDAR. No Camera. No Case.
Note: When mounting the Ronin-MX to the M600, SRW-60G is needed for video transmission. Please purchase individually. (notice:SRW-60G is not permitted for use on aerial platforms in North America.)
Terms and Conditions
|
Matrice 600 - TB48S Intelligent Flight Battery
$199.00
5700mAh, 22.8V battery that comes with charge and discharge management. New and powerful embedded battery cells provide power to the aircraft during flight. Charge using the DJI standard charger or battery charging hub.
Specifications Model: TB48S Capacity: 5700 mAh Voltage: 22.8 V Type: LiPo 6S Energy: 129.96 Wh Net Weight: 680 g Operating Temperature: 14° to 104° F (-10° to 40° C) Storage Temperature: Less than 3 months: -4° to 113° F (-20° to 45° C); More than 3 months: 72° to 82° F (22° to 28° C) Charge Temperature: 41° to 104° F (5° to 40° C) Max Charging Power: 180 W Matrice 600 - TB47S Intelligent Flight Battery (6PCS)
$954.00
$799.00
Matrice 600 - TB47S Intelligent Flight Battery × 6
4500mAh, 22.2V battery that comes with charge and discharge management. New and powerful embedded battery cells provide power to the aircraft during flight. Charge using the DJI standard charger or battery charging hub. Specifications Model: TB47S Capacity: 4500 mAh Voltage: 22.2 V Type: LiPo 6S Energy: 99.9 Wh Net Weight: 595 g Operating Temperature: 14° to 104° F (-10° to 40° C) Storage Temperature: Less than 3 months: -4° to 113° F (-20° to 45° C); More than 3 months: 72° to 82° F (22° to 28° C) Charge Temperature: 32° to 104° F (0° to 40° C) Max Charging Power: 180 W Phantom 3 Advanced with Extra Battery
$859.00
Matrice 600 Simultaneous Charging Station
$499.90
**CURRENTLY ON BACKORDER**
Smart PowerCharging Station SPCM100 Compare the SmartPowerCharge to the DJI HUB The SPCM100 is a commercial grade QUAD Charging Station designed and built exclusively for the DJI SMART BATTERY (LiPo) that is used in your INSPIRE1 and the NEW MATRICE M600 batteries. This system is MICRO-PROCESSOR controlled with built in Over-Voltage protection, Over-Loading Protection and Temperature Control on power supply input. The Short-Circuit protection on power supply input insures safe operation while charging the batteries. The SCPM100 also monitors the voltage and temperature to each battery insuring that each battery is charged safely eliminating damage and LIPO safety concerns. The system is capable of charging or deep cycling 4 DJI Smart Batteries simultaneously, your iPhone, or any USB device and 2 rechargeable remote controls (via 2, 26v charging ports on the end of device), all at the same time. You can even DEEP CYCLE selected batteries while charging others. When you put a SLOT in DEEP CYCLE MODE, we LOCK discharge at low voltage down to 8%. After the battery reaches below 5%, the system will automatically charge the battery to full capacity. The SPCM100 Charging Station is capable of simultaneously charging the TB47 and TB48. Set em in, turn it ON and forget it! A must have for serious INSPIRE1 users. For a complete HOW TO, CLICK HERE! 1. Charge 4 Batteries Simultaneously (Up to 6 with DJI Cable) 2. Charge 2 REMOTE CONTROLS at same time with batteries 3. Charge 2 USB devices such as your iPAD or iPhone or both with batteries and remotes all simultaneously. (8 devices charging at the same time) 4. Deep cycle and condition your batteries according to DJI recommendation 5. Auto charge your batteries after DEEP CYCLE MODE. 6. FIRMWARE Upgradable Compare the SmartPowerCharge to the DJI HUB Matrice 600 - Battery Travel Case
$299.00
The Matrice 600 Battery Travel Case can hold up 2 DJI Hex Chargers and 18 Intelligent Flight Batteries (TB47S / TB48S / TB47D / TB48D). Integrated wheels make the travel case easy to maneuver. Using the reserved spaces, batteries can be charged without removing batteries or chargers from the travel case. Specifications DJI Matrice 600 D-RTK Mounting Bracket Spare Part NO 6
$169.00
Required for installing the D-RTK GNSS
D-RTK Mounting Bracket Spare Part NO 6 Matrice 600 - Remote Controller
$549.00
The remote controller integrates video downlink and aircraft control into one system. The combined system operates at 2.4 GHz with a maximum signal transmission range of 5 km. The device features a number of standard and customizable buttons that allow users to quickly access certain aircraft functions, such as taking and reviewing photos/videos, as well as controlling the gimbal and landing gear. It is powered by a 2S rechargeable battery.
Operating Frequency:
Dual Users Capability: Master-and-Slave control Mobile Device Holder: Supports smartphones and tablets Output Power: 9 W Operating Temperature: 14° to 104° F (-10° to 40° C) Storage Temperature: Less than 3 months: -4° to 113° F (-20° to 45° C) More than 3 months: 72° to 82° F (22° to 28° C) Charge Temperature: 32° to 104° F (0° to 40° C) Built-in Battery: 6000 mAh, 2S LiPo Max Tablet Width: 170 mm Snoopy A-Series - 16
$0.00
A-Series integrated with DJI Matrice 600 Pro
A-Series - 16 Datasheet System Accuracy -- 4.6cm +/- Accuracy @ 50m Snoopy A-Series
--Control Point Program - Built in no extra software required --Strip-to-Strip Program - Built in no extra software required
--830g --Max Range 100m Range --300,000 point/second
Scanlook: Support: TIER 1
DJI Matrice 600 Pro
Zenmuse Z3 & Mounting Bracket
$899.00 - $1,068.00
Zenmuse Z3
The Zenmuse Z3 gimbal and camera features an optical zoom lens. It provides a 3.5 optical zoom and 2x digital zoom. The Type 1/2.3 CMOS sensor supports 4K video recording and 12MP still photos. As with other DJI 3-axis gimbal systems, the Zenmuse Z3 can be mounted onto a DJI aircraft* and stream live HD video to the DJI GO app. * Currently supports the Inspire 1 series, Inspire 1 v2.0, Matrice 100 and Matrice 600. Matrice 600 - Zenmuse X3/X5 Series Gimbal Mounting Bracket Mounting Zenmuse X3 and X5 series cameras onto the Matrice 600 for high quality stable imaging and a flight time of up to 30 minutes. In the box: Lower Expansion Bay Plate × 1 Gimbal Bracket × 4 Lower Expansion Bay Connector × 4 X5 Mounting Key × 1 X5R Mounting Key × 2 Damper × 4 Gimbal Attitude Cable × 1 Gimbal Video Cable × 1 Gimbal Mounting Plate × 1 Screw Pack × 3 Zenmuse X5 & Mounting Kit
$1,799.00 - $1,968.00
Matrice 600 - Zenmuse X3/X5 Series Gimbal Mounting Bracket Terms and Conditions |
